Concrete mixer production line is composed of many equipment components, hoist is one of them. In case of insufficient material discharge, the efficiency and quality of the whole production line will be affected.

對于混凝土攪拌站管理人員都知道需定時對商品混凝土攪拌站做一全 方 位的檢查。造成混凝土攪拌站的提升機排料量不足的原因有：

For the management of concrete mixing station, they all know that it is necessary to conduct a comprehensive inspection of commercial concrete mixing station regularly. The causes of insufficient discharge of the elevator in the concrete mixing plant are as follows:

造成混凝土攪拌站的排料量不足的情況是因為設備的部提升能力小的原因。所以提升機排料處因為物料出現堵塞，而造成物料沒有辦法進行到下個環節，這樣也就造成了物料的排量不足。

The insufficient discharge of concrete mixing plant is due to the small lifting capacity of the equipment. Therefore, due to the blockage of the material at the discharge place of the hoist, the material can not be carried out to the next link, which leads to the insufficient displacement of the material.

混凝土攪拌機需要提高提升機機械的生產能力，保證排料量的充阻。在排料口出現尺寸過小時是需要需要更換，要是角度不利于物料的傳遞是需要對溜槽的結構進行相應的修正，而在生產時粘連在鏈條以及溜槽內的殘余物料需要工作人員及時的進行清理。保證混凝土攪拌機的提升機排料量足夠，提升整個生產線的效率。

Concrete mixer needs to improve the production capacity of hoist machinery to ensure the charge resistance of discharge. When the size of the discharge port is too small, it needs to be replaced. If the angle is not conducive to the transfer of materials, it needs to modify the structure of the chute. In production, the residual materials adhering to the chain and the chute need to be cleaned up in time. Ensure that the concrete mixer hoist discharge enough, improve the efficiency of the whole production line.